Mancraft MMR Regulator fi 6mm

MMR- Mancraft Micro Regulator. Ultra compact regulator, improved, smaller version of the HRR with even better refresh rate.

Features:

• Modular design, with main body dimensions of 25 x 56mm
• Oversized 4.5mm piston bore for extremely high flow and refresh rate
• Adjustable output pressure from 60psi to 250psi (60 to 120psi with soft spring, 120-250 with hard spring (included in set))
• Zip-tie tournament closure without the need for additional parts
• Simple design requires only 3 O-rings, promoting both reliability and ease of maintenance

It is a device for reducing gas pressure. The pressure can be adjusted in the range of 4 to about 15 bar. The adjustment is made via a screw on the side of the regulator. Unscrewing the screw increases the pressure.

Regulator input - G1/2" thread - standard paintball HP bottles.

The regulator can be used with ON / OFF and the PIN bottles.

The pressure gauge shows the output pressure.

Designed for an operating pressure of less than 200 bar